Type: | Piezoresistive Pressure Sensor |
---|---|
Component: | SemiConductor Type |
Output Signal Type: | Analog Type |
Production Process: | Integration |
Material: | Stainless Steel |
Thread Type: | M |
Customization: |
---|
Suppliers with verified business licenses
@1.5mADC,25ºC |
|
Pressure range | -0.1MPa0~20kPa100MPa |
Overpressure | 1.5 times FS or 110MPa (min.value is valid) |
Power supply | 1.5mADC |
Signal | ≥70mVDC(0~20kPa,≥50mVDC) |
Accuracy | ±0.1%FS(min.) ±0.25%FS(typ.) ±0.5%FS(max.) |
Long-term stability | ±0.3%FS/year |
Compensation temp. | 0ºC~50ºC |
Operation temp. | -10ºC~80ºC |
Storage temp. | -40ºC~100ºC |
Zero temp. coefficient | ±0.02%FS/ºC(typ.) ±0.04%FS/ºC(max.) |
FS temp. coefficient | ±0.02%FS/ºC(typ.) ±0.04%FS/ºC(max.) |
Housing | Stainless steel 1Cr18Ni9Ti |
Diaphragm | Stainless steel 316L |
O-ring | Viton |
Cable | Polythene |
Response time(10%~90%) | ≤1ms |
Insulation resistance | 100MΩ,100VDC |
Production | IP65(cable connection) |
MPM380 |
Piezoresistive Pressure Transducer | ||||||||||||||
Code | Pressure range | Ref. | Code | Pressure range | Ref. | ||||||||||
0B | 0~20kPa | G | 12 | 0~2MPa | G, A | ||||||||||
0A | 0~35kPa | G | 13 | 0~3.5MPa | G, A, S | ||||||||||
02 | 0~70kPa | G, A | 14 | 0~7MPa | A, S | ||||||||||
03 | 0~100kPa | G, A | 15 | 0~10MPa | S | ||||||||||
07 | 0~200kPa | G, A | 17 | 0~20MPa | S | ||||||||||
08 | 0~350kPa | G, A | 18 | 0~35MPa | S | ||||||||||
09 | 0~700kPa | G, A | 19 | 0~70MPa | S | ||||||||||
10 | 0~1000kPa | G, A | 20 | 0~100MPa | S | ||||||||||
Code | Pressure type | ||||||||||||||
G | Gauge | ||||||||||||||
A | Absolute | ||||||||||||||
S | Sealed gauge | ||||||||||||||
Code | Electric connection | ||||||||||||||
I | Plug connection | ||||||||||||||
II | Cable connection | ||||||||||||||
Cable length(m) | 1.5m cable is free of charge; the extra cable should be paid additionally. | ||||||||||||||
Code | Pressure port | ||||||||||||||
PC1 | Flush diaphragm, M20×1.5 male | ||||||||||||||
PC3 | Flush diaphragm, G1/2 male | ||||||||||||||
C1 | M20×1.5 male, face type seal | ||||||||||||||
C5 | M20×1.5 male, watline seal | ||||||||||||||
MPM380 10 G II 5 PC1 the whole spec. |
Suppliers with verified business licenses