Diamond Member Since 2012 
Audited Supplier
| Reference FOB Price: | US $1.00-50.00 / Piece |
|---|---|
| Min. Order: | 1 Piece |
| Type: | Piezoresistive Pressure Sensor |
|---|---|
| Component: | SemiConductor Type |
| For: | Diffused Silicon Pressure Transmitter |
| Output Signal Type: | Analog Type |
| Production Process: | Normal Wirewound |
| Material: | Stainless Steel |
Anti-corrosive Air Absolute Gauge Piezoresistive OEM SS316L Customized Assembled Pressure Sensor
Features:
- Pressure range 0~20kPa .... 100MPa
- Gauge, absolute, sealed gauge
- Constant current/voltage power supply
- Isolated construction to measure different medias
- OEM, custom-design available
Application:
- Industrial control
- level and liquid measurement
- pressure meter, pressure calibrator
- Refrigeration equipment and air conditioner
- Aviation and navigation inspection
Description
MPM280 Assembled Pressure Sensor is produced by putting basic pressure sensor into the housing with standard or special thread;. The pressure port thread can be face type seal or waterline seal due to your requirement. With flexible construction and strict inspecting and screening, the assembled MPM280 pressure sensor has similar application with general type sensor, and can be used for mounting and production of different pressure instruments.
Electric Connection:
Power supply: ≤2.0mADC; ≤10V DC
Electric connection: Kovar pin or 100mm silicon rubber flexible wires
Common mode voltage output: 50% of input (typ.)
Input impedance: 3kΩ~8kΩ
Output impedance: 3.5kΩ~6kΩ
Response (10%~90%): <1ms
Insulation resistor: 100MΩ, 100VDC
Overpressure: 1.5 times FS
Construction Specification
Diaphragm: Stainless steel 316L Titanium TA1 (MPM280 Ti) Tantalum Ta (MPM280 TH)
Housing: Stainless steel 316L Titanium TC4 (MPM280 Ti) Hastelloy C (MPM280 TH)
Pin: Kovar
O-ring: Viton
New weight: ~ 23g (General)
~ 50g (Flush diaphragm)
~ 125g (Assembled)
~ 13.5g (MPM280 Ti)
Environment Condition
Position effect: deviate 90° from any orientation, zero change ≤0.05%FS
Shock: no change at 10gRMS, (20~2000)Hz
Impact: 100g, 11ms
Media compatibility: the gas or liquid which is compatible with construction material and Viton
Workig Condition
Media temperature: (25±1)°C
Environment temperature: (25±1)°C
Shock: 0.1g (1m/s/s) Max
Humidity: (50%±10%) RH
Local air pressure: (86 ~ 106) kPa
Power supply: (1.5±0.0015)mADC
Specifications:
| Item* | Min. | Typ. | Max. | Units |
| Linearity | ±0.15 | ±0.25 | %FS,BFSL | |
| Repeatability | ±0.05 | ±0.075 | %FS | |
| Hysteresis | ±0.05 | ±0.075 | %FS | |
| Zero output | ±2 | mVDC | ||
| FS output** | 70 | mVDC | ||
| Zero thermal error | ±0.75 | ±1.0 | %FS, @25ºC | |
| FS thermal error | ±0.75 | ±1.0 | %FS, @25ºC | |
| Compensated temp. range | 0~50 | ºC | ||
| Working temp. range | -40~125 | ºC | ||
| Storage temp. range | -40~125 | ºC | ||
| Stability | ±0.2 | ±0.3 | %FS/year | |
| *testing at basic condition,G: Gauge; A: Absolute; S: Sealed gauge ** 0AG, FS output ≥60mV 0BG, FS output ≥45mV 02A, 03A, 02GY, 03GY, FS output ≥50mV 07A, 08A, 07GY, 08GY, FS output ≥60mV | ||||
| MPM280(TS/TH/Ti)* | Piezoresistive OEM Pressure Sensor | |||||||||||||||||
| Range code | Pressure range | Ref. | Range code | Pressure range | Ref. | |||||||||||||
| 0B | 0~20kPa | G | 10 | 0~1MPa | G.A | |||||||||||||
| 0A | 0~35kPa | G | 12 | 0~2MPa | G.A | |||||||||||||
| 02 | 0~70kPa | G.A | 13 | 0~3.5MPa | G.S.A | |||||||||||||
| 03 | 0~100kPa | G.A | 14 | 0~7MPa | S | |||||||||||||
| 07 | 0~200kPa | G.A | 15 | 0~10MPa | S | |||||||||||||
| 08 | 0~350kPa | G.A | 17 | 0~20MPa | S | |||||||||||||
| 09 | 0~700kPa | G.A | 18 | 0~35MPa | S | |||||||||||||
| Code | Pressure type | |||||||||||||||||
| G | Gauge | |||||||||||||||||
| A | Absolute | |||||||||||||||||
| S | Sealed gauge | |||||||||||||||||
| Code | Pressure connection | Installation | ||||||||||||||||
| 0 or null | O-ring | |||||||||||||||||
| 1 | Assembled M20x1.5 male, waterline seal | Top: M24x1 male (P≤2MPa) | ||||||||||||||||
| 2 | Assembled M20x1.5 male, waterline seal | Top: M27x2 male | ||||||||||||||||
| 3 | Welded M20x1.5 male, waterline seal | Top: M24x1 male (P≤2MPa) | ||||||||||||||||
| 4 | Welded M20x1.5 male, waterline seal | Top: M27x2 male | ||||||||||||||||
| PC1 | Flush diaphragm M20x1.5 male, | Top: M24x1 female | ||||||||||||||||
| PC3 | Flush diaphragm G1/2 male, | Top: M24x1 female | ||||||||||||||||
| Code | Compensation | |||||||||||||||||
| L | Laser trimming | |||||||||||||||||
| M | Outer compensated resistor (providing resistor value) | |||||||||||||||||
| Code | Electric connection | |||||||||||||||||
| 1 | φ0.5mm Kovar pin | |||||||||||||||||
| 3 | 4-color flexible wire, default length:100mm | |||||||||||||||||
| Code | Special measurement | |||||||||||||||||
| Y | Gauge sensor to measure vacuum (0~ -100kPa) | |||||||||||||||||
| MPM280 09 G 0 L 1 Y The whole spec | ||||||||||||||||||
Certificates We Have
Company Overview
Products Family
Applications:
Exhibition:
FAQ:
1. Q: Are you a manufacturer or trading company?
A: We are a 48-year professional manufacturer of Pressure/ Level/ Temperature/Flow transmitters with 4~20mA, Hart, Rs485 & Modbus protocols, pressure sensors with SDI, I2C, 4~20mA, 0.5~4.5V and etc, and wireless IOT measurement transmitters. We provide high-quality products with high competitive factory prices.
2. Q: What's your quality control system?
A: As an ISO9001:2008 certificated manufacturer, we have a strict quality control system, and each product is done with fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.
3. Q: Is there MOQ with your product?
A: We have no MOQ limits, 1pc for testing is acceptable.
4. Q: Do you provide customized products?
A: Yes, we can print your logo on our products; OEM, ODM & customization are welcomed.
5. Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.
6. Q: What is the lead time of your product?
A: We are a factory, our lead time is always within 10~15 working days for products without customization, but lead-time will vary based on different products. You can check detailed lead-time with our sales.
7. Q: What international certificates do you have for your products?
A: We have CE, RoHS, UL, ATEX as well as ship-use DNV, etc.