Basic Info.
Main Application
Water, Wastewater, Diesel Fuel, Fuel Oil, Corrosive Liquid/Gas
Type
Electromagnetic Flow Meter
Environment Temperature
-20c~60c
Alarm Output
Rated Value 30V DC, 100mA
Communication Signal
RS485 Communication Protocol
Load Resistance
250omega~ 600omega;
Rated Voltage of Power Supply
220V AC: 100V~240V AC
Housing Material
Aluminum Alloy
Transport Package
Standard Package for Exporting
Product Description
Product Description
MFE600Z Series Electromagnetic Flowmeter (hereinafter called Electromagnetic Flowmeter) is designed and manufactured with the most advanced domestic and abroad technology, featuring high accuracy, reliability, good stability and long service life.
We pay our attention to every detail in the process of the product structure design, material selection, manufacturing, assembly and factory testing etc. With a water tower up to 37m as pressure stabilizer for actual flow calibration, we have a professional production line for electromagnetic flowmeter, also we design and develop a series of software and hardware for electromagnetic flowmeter for mass production to ensure high quality in long term use. The product has backlight and wide temperature-ranged LCD display. With fully practical function, visual display, easy operation, it saves troubles for on-site installation operation and maintenance. MFE600Z can be mainly used
in environmental protection and heating fields, Building automation, flow monitoring.
Product Feature
• The measurement accuracy will not be influenced by the fluid density, viscosity, temperature, pressure and electrical conductivity changes;
• Open flow without moving parts in measuring pipe, no pressure loss;
• No mechanical inertia, with good sensitivity, it can measure the transient pulsating flux, and has good linearity;
• Only the lining and electrodes contact with the media, as long as the selection of electrode and lining materials is proper, they can be corrosion resistance and abrasive resistance, and are able to ensure long-term use;
• Multi-electrode structure ensures high accuracy. With the grounding electrode, it doesn't need grounding ring which saves the cost;
• When power off, EEPROM can protect parameter setting and cumulative values;
• The converter uses a low-power consumption single-chip for processing data which ensure the reliable performance, high accuracy, low power consumption and zero stability. Dot matrix LCD can display the integrated flux, transient flux, velocity, flow percentage and other parameters;
• Two-way measuring system can be used for measuring forward flux and reverse flux; low frequency rectangular wave excitation improves
the stability of flow, low power loss and superior low velocity characteristic.
Specification
MFE600 Electromagnetic Flowmeter Performance Introduction(Flange)Diameter | DN10 ~ DN800 |
Excitation type Mode | Constant flux square wave excitation Installation form: an integral flange, split flange Lined :neoprene, urethane rubber, PTFE, F46 Electrode materials: 316L, Hc, Hb, titanium, tantalum, platinum iridium, tungsten carbide Ground :built-in ground electrode (DN25 and above) Media: Conductive liquid Accuracy grade: 0.2,0.5,1.0 Medium conductivity> 5 μS / cm Flow velocity ≤ 15 m / s Pipe connected Flange GB 81 ~ 59 Pipe connection: flange connection |
Installation | Integrated flanged, Separated Flanged |
Lining | Neoprene, Polyurethane rubber, PTFE,F46 |
Electrode Material | 316L, Hc, Hb, Titanium, Tantalum, Platinum iridium, Tungsten carbide |
Grounding | Built-in grounding electrode (DN25 and above) |
Medium | Conductive liquid |
Accuracy Grade | 0.2, 0.5, 1.0 |
Media Conductivity | > 5 μS/cm |
Velocity | ≤ 15 m/s |
Pipe Connection Flange | Flange GB 81~59 |
Pipe Connection | Flange Connection |
Media Temp. | Neoprene: -10ºC~ 60ºC; PTFE: -10ºC~ 120ºC Urethane Rubber: -10ºC~80ºC; F46: -10ºC~ 150ºC |
Rated Pressure | 4.0 MPa; 1.6 MPa; 1.0 MPa |
Protection Level | IP65; IP68 |
Output signal | 4mA~ 20mA DC current; Pulse/ Frequency, Alarm after Upper and Lower limits |
Cable connection | M20×1.5 female |
Communication | RS 485 protocol (Modbus protocol) RS 232 protocol (optional) |
Display | Transient flux, Alarm display, Percentage, Velocity, Forward and Reverse Integrated Flux and Total Integrated Flux |
Power supply | 220V AC,24V DC,3.6 V battery power supply |
Type | General, Waterproof |
High Voltage | Customized |
MFE600 Electromagnetic Flowmeter Performance (Clamp-on)Diameter | DN10 ~ DN500 |
Excitation type Mode | Constant flux square wave excitation Installation form: an integral flange, split flange Lined :neoprene, urethane rubber, PTFE, F46 Electrode materials: 316L, Hc, Hb, titanium, tantalum, platinum iridium, tungsten carbide Ground :built-in ground electrode (DN25 and above) Media: Conductive liquid Accuracy grade: 0.2,0.5,1.0 Medium conductivity> 5 μS / cm Flow velocity ≤ 15 m / s Pipe connected Flange GB 81 ~ 59 Pipe connection: flange connection |
Installation | Integrated clamp-on, Separated clamp-on |
Lining | Neoprene, Polyurethane rubber, PTFE,F46 |
Electrode Material | 316L, Hc, Hb, Titanium, Tantalum, Platinum iridium, Tungsten carbide |
Grounding | Built-in grounding electrode (DN25 and above) |
Medium | Conductive liquid |
Accuracy Grade | 0.2, 0.5, 1.0 |
Media Conductivity | > 5μS/cm |
Velocity | ≤ 15 m/s |
Pipe Connection Flange | Flange GB 81~59 |
Pipe Connection | Flange Connection |
Media Temp. | Neoprene: -10ºC~ 60ºC; PTFE: -10ºC ~ 120ºC Urethane Rubber: -10ºC~80ºC; F46: -10ºC~ 150ºC |
Rated Pressure | 4.0 MPa; 1.6 MPa; 1.0MPa |
Protection Level | IP65; IP68 |
Output signal | 4mA~ 20mA DC current; Pulse/ Frequency, Alarm after Upper and Lower limits |
Cable connection | M20×1.5 female |
Communication | RS 485 protocol(modbus protocol) RS 232 protocol(optional) |
Display | Transient flux, Alarm display, Percentage, Velocity, Forward and Reverse Integrated Flux and Total Integrated Flux |
Power supply | 220V AC,24V DC,3.6V battery power supply |
Type | General, Waterproof |
High Voltage | Customized |
The flowmeter model selection is very important in application of instrument. The related information shows that in practical application of instrument, 2/3 failures are caused by incorrect selection of model and incorrect installation of instrument to which the special attention shall be paid.
1. Technological data collection
a. The measured fluid name and its chemical substances
b. Maximum flux, minimum flux and normal flux
c. Maximum working pressure;
d. Maximum temperature, minimum temperature.
2. The measured liquid shall have certain conductivity, electrical conductivity ≥5μS/cm.
3. The maximum flux and the minimum flux shall meet the values in the measurable flux range table.
4. The actual maximum working pressure shall be less than the rated working pressure of flowmeter.
5. The maximum working temperature and the minimum working temperature shall meet the temperature requirements stipulated for flowmeter.
6. Whether negative pressure exists or not in the processing pipeline shall be confirmed.
You can also select the appropriate flowmeter electromagnetic flowmeter according to actual use, and if the interior diameter of the electromagnetic flowmeter selected differs from that of the existing process pipe, then pipe reduction or expansion shall be considered.
1. If the pipeline should be contracted, whether the pressure loss caused by the pipe contraction will affect the process flow or not shall be considered.
2. Considering the measurement accuracy and price, you can choose a smaller diameter electromagnetic flowmeter, which can reduce the investment relatively.
3. When measuring clean water, the economic velocity is 2m/s ~3m/s; when measuring the solution of crystallization, the velocity shall be increased approximately to common velocity of ≥2 m/s ,in order to prevent the electrode of electromagnetic from flowmeter being covered. Certifications
Company Profile
Products Family
FAQ
1. Q: Are you manufacturer or trading company?
A: We are 48-year professional manufacturer of Pressure/ Level/ Temperature/Flow transmitters with 4~20mA, Hart, Rs485 & Modbus protocols, pressure sensors with SDI, I2C, 4~20mA, 0.5~4.5V and etc, and wireless IOT measurement transmitters. We provide high quality products with high competitive factory price.
2. Q: What's your quality control system?
A: As an ISO9001:2008 certificated manufacturer, we have strict quality control system, and each product is done fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.
3. Q: Is there MOQ with your product?
A: We have no MOQ limits, 1pc for testing is acceptable.
4. Q: Do you provide customized products?
A: Yes, we can print your logo on our products; OEM, ODM & customization are welcomed.
5. Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.
6. Q: What is lead time of your product?
A: We are factory, our lead time is always within 10~15 working days for products without customization, but lead time will vary based on different products. You can check detail lead time with our sales.
7. Q: What international certificates do you have for your products?
A: we have CE, RoHS, UL, ATEX as well as ship-use DNV etc.
Address:
No. 18 Yingda Road, Baoji, Shaanxi, China
Business Type:
Manufacturer/Factory
Business Range:
Agriculture & Food, Chemicals, Electrical & Electronics, Health & Medicine, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Service
Management System Certification:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
Company Introduction:
Since its inception in 1993, Micro Sensor Co., Ltd. (referred to as "Micro Sensor") has been a global industrial instrumentation manufacturer. Specializing in providing industrial measuring instrument solutions for pressure, level, temperature, and flow, Micro Sensor serves various industries including oil & gas, renewable energy, industrial gases, water & wastewater, marine & shipbuilding, HVAC, hydraulics & pneumatics, mechanical manufacturing & automation, as well as food & beverage and paper.
Micro Sensor boasts a global workforce of over 800 employees and operates four industrial parks in three locations in China (Baoji, Xi′an, and Shanghai), with the additional establishment of Micro Sensor GmbH in Essen, Germany. The company′s technical R&D is based on the "IPD R&D management system, " with over 100 core R&D experts and more than 140 R&D patents, as well as over 220 domestic and international certificates. It serves customers in over 100 countries and regions, accumulating to over 20, 000 satisfied clients.
Micro Sensor employs the "IPD R&D management system" in the term of technological R&D. It has established industry-leading high-standard laboratories in Baoji, Xi′an, and Shanghai, with over 100 core R&D experts and more than 140 R&D patents. The company has obtained over 220 domestic and international professional certificates, including CE, RoHS, UL, CB, Ex, 3A, ATEX, CCS, MA, DNV· GL, and SON, and has contributed to the development of a total of 9 national, regional, and industry standards. Additionally, the company holds numerous qualification certificates, such as ICE Systems Certificate, ATEX Explosion-Proof Quality Management Systems Certificate, ISO 14001: 2015 Environmental Management Systems Certificate, ISO 45001: 2018 Occupational Health and Safety Management Systems Certificate, and ISO 9001: 2015 Quality Management Systems Certificate, etc.