Smart Integrated Flange Type Stable DN1400 Intelligent Electromagnetic Flow Meter MFE600E

• After-sales Service: 1 year
• Warranty: 1 year
• Accuracy: ±0.2-0.5%
• Main Application: Water, Wastewater, Diesel Fuel, Fuel Oil, Corrosive Liquid/Gas
• Size: DN100-500
• Sensor: Tube/Flange
• Model NO.: MFE600E
• Application: Industrial Production
• Type: Electromagnetic Flow Meter
• Measuring Media: Liquid
• Measuring Principle: Electrical Principles
• Measurement Object: Closed Pipeline
• Certification: ISO
• Protection Class: IP65
• Environment Temperature: -20c~60c
• Output Signal: 4-20madc
• Alarm Output: Rated Value 30V DC, 100mA
• Communication Signal: RS485 Communication Protocol
• Load Resistance: 250omega~ 600omega
• Diameter of Flowmeter: mm
• Rated Voltage of Power Supply: 220V AC: 100V~240V AC
• Wire Terminals: M3 Screw
• Housing Material: Aluminum Alloy
• Transport Package: Standard Package for Exporting
• Specification: ISO9000
• Trademark: Micro Sensor
• Origin: Baoji China

Product Description

Smart Integrated Flange Type Stable DN1400 Intelligent Electromagnetic Flow Meter MFE600E

Features:
 • The measurement accuracy will not be influenced by the fluid density, viscosity, temperature, pressure, and electrical conductivity changes;
• Open flow without moving parts in measuring pipe, no pressure loss;
• Simple structure, easy installation, no high requirements for straight pipe section;
• No mechanical inertia, with good sensitivity, it can measure the transient pulsating flux, and has good linearity;
• Only the lining and electrodes contact with the media, as long as the selection of electrode and lining materials is proper, they can be corrosion resistance and abrasive resistance, and are able to ensure long-term use;
• Multi-electrode structure ensures high accuracy. With the grounding electrode, it doesn't need a grounding ring which saves the cost;
• When power off, EEPROM can protect parameter setting and cumulative values;
• The converter uses a low-power consumption single-chip for processing data which ensure reliable performance, high accuracy, low power consumption, and zero stability. Dot-matrix LCD can display the integrated flux, transient flux, velocity, flow percentage, and other parameters;
• Two-way measuring system can be used for measuring forward flux and reverse flux; low-frequency rectangular wave excitation improves the stability of flow, low power loss, and superior low-velocity characteristic.
 
Introduction
MFE600E Series Electromagnetic Flowmeter (hereinafter called Electromagnetic Flowmeter) is designed and manufactured with the most advanced domestic and abroad technology, featuring high accuracy, reliability, good stability and long service life.

We pay attention to every detail in the process of the product structure design, material selection, manufacturing, assembly and factory testing, etc. With a water tower up to 37m as pressure stabilizer for actual flow calibration, we have a professional production line for electromagnetic flowmeter, also we design and develop a series of software and hardware for electromagnetic flowmeter for mass production to ensure high quality in long term use. The product has backlight and wide temperature-ranged LCD display. With fully practical function, visual display, easy operation, it saves troubles for on-site installation operation and maintenance. MFE600E can be widely used in industrial fields such as petroleum, chemical, metallurgy, water supply and drainage, steel, coal, paper, food, textile, environmental protection and other municipal administration, water conservancy construction field, etc.


Performance
 

Diameter	Flange type: DN6~DN1600, ≥DN20 with built-in grounding electrode
	Sanitary type: DN6~DN50
	Threaded type: DN6~DN50
	Clamping type: DN10~DN300
Measurement accuracy	±0.2%FS,±0.5%FS
Electrode type	Standard fixed electrode, antifouling electrode
	DN6~DN20: a pair of measuring electrodes, no grounding electrodes
	DN25~DN500: a pair of measuring electrodes and a pair of grounding electrodes
	≥DN600: 2 pairs of measuring electrodes and a pair of grounding electrodes
Structure type	Integrated type, separated type (cable length of separated type≤100m)
Rated pressure	GB: PN2.5, PN6, PN16, PN25, PN40, PN63, PN100, PN160, PN250
	ANSI: CLASS 150, CLASS 300, CLASS 600, CLASS 900
	DIN: PN10, PN16, PN25, PN40, PN63
	JIS: 5K,10K,16K, 20K, 30K, 40K, 63K
	Others: customizable
Electrode material	316L, Ti, HB/HC, Ta, WC, Pt
Lining material	Neoprene (CR), Natural Rubber (NR), Polyurethane Rubber (PU)
	Polytetrafluoroethylene (PTFE), F46, PFA
Measured pipe	Stainless steel
Flange/body flange	Carbon steel (standard), stainless steel (optional)
Converter housing	Aluminum die-casting
Power supply	100 V AC~240V AC
	12V DC, 24V DC
	Battery supply (LCD display, RS485 output, wireless output, frequency/pulse output, and the frequency/pulse output is used only for calibration or calibration purposes.)
	Solar power with storage battery
Output signal	4mA~20mA DC (load resistance 0Ω~750Ω, active output)
	Hart
	Frequency, pulse output (Passive, active output optional)
	Upper and lower limit alarm output
	RS485 (standard Modbus protocol), RS232
	Profibus-DP, Profibus-PA
	2G, 4G, NB, LoRa wireless transmission
Electrical connection	M20×1.5
IP protection	IP65, IP68 (separated type only)
Environmental temp.	-20ºC ~60ºC
Storage temp.	-40ºC ~60ºC
Relative humidity	5%~90%

Table 2 Integrated flowmeter dimensions

DN	Rated Pressure (MPa)	Outline Dimension(mm)		Flange Connection Dimension(mm)
		A	H	D	K	n-φL
6	4.0	150	304	90	60	4-Φ14
10		150	304	90	60	4-Φ14
15		150	304	95	65	4-Φ14
20		150	304	105	75	4-Φ14
25		150	312	115	85	4-Φ14
32		150	330	140	100	4-Φ18
40		150	340	150	110	4-Φ18
50		200	338	165	125	4-Φ18
65		200	358	185	145	8-Φ18
80		200	374	200	160	8-Φ18
100	1.6	250	402	220	180	8-Φ18
125		250	425	250	210	8-Φ18
150		300	458	285	240	8-Φ23
200	1.0	350	522	340	295	8-Φ23
250		400	574	395	350	12-Φ23
300		500	624	445	400	12-Φ23
350		500	678	500	460	16-Φ23
400		600	742	656	515	16-Φ25
450		600	794	615	565	20-Φ25
500		600	862	670	620	20-Φ25
600		600	950	780	725	20-Φ25
700		700	1058	895	840	24-Φ30
800		800	1166	1010	950	24-Φ34
900		900	1272	1110	1050	28-Φ34
1000		1000	1376	1220	1160	28-Φ34
1200	0.6	1200	1578	1405	1340	32-Φ34
1400		1400	1840	1630	1560	36-Φ36
1600		1600	2078	1830	1760	40-Φ36

Separated flowmeter dimensions:

DN	Rated Pressure (MPa)	Outline Dimension(mm)		Flange Connection Dimension(mm)
		A	H	D	K	n-φL
6	4.0	150	245	Φ90	Φ60	4-Φ14
10		150	245	Φ90	Φ60	4-Φ14
15		150	245	Φ95	φ65	4-Φ14
20		150	245	Φ105	Φ75	4-Φ14
25		150	252	Φ115	ΦΦ85	4-Φ14
32		150	270	Φ140	100φ	4-Φ18
40		150	280	Φ150	Φ110	4-Φ18
50		200	280	Φ165	Φ125	4-Φ18
65		200	300	Φ185	Φ145	8-Φ18
80		200	314	Φ200	Φ160	8-Φ18
100	1.6	250	342	Φ220	Φ180	8-Φ18
125		250	366	Φ250	Φ210	8-Φ18
150		300	400	Φ285	Φ240	8-Φ23
200	1.0	350	464	Φ340	Φ295	8-Φ23
250		400	516	Φ395	Φ350	12-Φ23
300		500	566	Φ445	Φ400	12-Φ23
350		500	618	φ500	Φ460	16-Φ23
400		600	682	Φ656	Φ515	16-Φ25
450		600	734	Φ615	Φ565	20-Φ25
500		600	802	Φ670	Φ620	20-Φ25
600		600	892	Φ780	Φ725	20-Φ25
700		700	998	Φ895	Φ840	24-Φ30
800		800	1106	Φ1010	Φ950	24-Φ34
900		900	1212	Φ1110	Φ1050	28-Φ34
1000		1000	1316	Φ1220	Φ1160	28-Φ34
1200	0.6	1200	1518	Φ1405	Φ1340	32-Φ34
1400		1400	1780	Φ1630	Φ1560	36-Φ36
1600		1600	2018	Φ1830	Φ1760	40-Φ36

Sensor Grounding
Since the voltage of the inductive signal of the electromagnetic flowmeter is small, it is easily affected by noise. Its reference potential must be the same as the measured liquid potential. Therefore, the reference potential of the sensor (terminal potential), the reference potential of converters and amplifiers are also the same as measured liquid potential, and the liquid potential has to be the same as the ground potential. The electromagnetic flowmeter is equipped with a ground loop, which is for establishing a liquid ground via contact with liquid, and for protecting lining meanwhile. The instrument grounding is shown as below:

Order Notes

According to statistics from authoritative organizations in the world, one-third of the cases of flow meter failure are caused by the quality of the product itself, and two-thirds of the cases are caused by product selection and on-site installation that do not meet the requirements. The selection of an electromagnetic flowmeter requires the implementation of the following parameters.
1. Collect process data
a)The name of the measured fluid, and the composition of the chemical substance contained;
b)Max. flow, min. flow, common flow;
c)Max. Working pressure;
d)Max. Temp., min. Temp.

2. The measured fluid must be conductive, conductivity
> 5μS/cm.

3. The maximum flow and the minimum flow must conform to the values of the flow range in table 7.
4. When measuring cleaning media, the economic low rate is 1.5m/s~3m/s; When measuring easy crystallization solution, the flow rate should be appropriately increased to 3m/s~4m/s to automatically clean and prevent adhesion deposition; for measuring ore slurry, etc. For wear-resistant fluids, the flow rate should be appropriately reduced to 1m/s~2m/s to reduce the wear on the lining and electrodes. In practical applications, there is rarely a flow velocity exceeding 7m/s, and it is even rarer to exceed 10m/s.
5.The actual maximum working pressure must be less than the rated working pressure of the flowmeter.
6. The maximum and minimum working temperature must meet the requirements specified in the flowmeter.
7. Confirm whether there is negative pressure in process pipeline.
 

Certificates We Have

Company Overview

Products Family

Applications:

Exhibition:

FAQ:
1. Q: Are you a manufacturer or trading company?
    A: We are a 48-year professional manufacturer of Pressure/ Level/ Temperature/Flow transmitters with 4~20mA, Hart, Rs485 & Modbus protocols, pressure sensors with SDI, I2C, 4~20mA, 0.5~4.5V and etc, and wireless IOT measurement transmitters. We provide high-quality products with high competitive factory prices.
 
2. Q: What's your quality control system?
    A: As an ISO9001:2008 certificated manufacturer, we have a strict quality control system, and each product is done with fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.
 
3. Q: Is there MOQ with your product?
    A: We have no MOQ limits, 1pc for testing is acceptable.
 
4. Q: Do you provide customized products?
    A: Yes, we can print your logo on our products; OEM, ODM & customization are welcomed.
 
5. Q: What is the warranty of your products? And after-sales service?
    A: Our warranty time is 12 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.
 
6. Q: What is the lead time of your product?
    A: We are a factory, our lead time is always within 10~15 working days for products without customization, but lead-time will vary based on different products. You can check detailed lead-time with our sales.

7. Q: What international certificates do you have for your products?
    A: We have CE, RoHS, UL, ATEX as well as ship-use DNV, etc.