RoHS Certified Accurate Gauge Absolute Stainless Steel Piezoresistive OEM Differential Pressure Sensor
Features
1. Pressure range 0~35kPa...3.5MPa
2. Constant current/voltage power supply
3. Isolated construction, possible to various media
4. OEM differential pressure sensor
5. 316L stainless steel
6. High static pressure 20MPa
Application
·Industrial process control ·differential pressure measure ·gas, liquid pressure measure
·Pressure checking meter ·Pressure calibrator ·Ventura and eddy-current flow meter
Introduction
MDM290 piezoresistive differential pressure sensor is OEM differential pressure sensor with stainless steel
isolated diaphragm. It has integrated construction, high static pressure, high stability and good reliability. The high and low pressure sides are protected by isolated diaphragm. It can be used for measuring corrosive and conductive flow media. The measured differential pressure is transmitted onto the die through the diaphragm and filling silicon oil, so that the sensor could measure differential pressure precisely. The sensor is tested on the advanced production line, with the popular dimension, MDM290 differential pressure sensors are widely used for industrial process control and differential pressure measure fields, etc.
Electric Performance
1. Power supply: ≤2.0mADC; ≤10V DC
2. Electric connection: 100mm silicon rubber flexible wires
3. Common mode voltage input: 50% of input (typ.)
4. Input impedance: 3kΩ~8kΩ
5. Output impedance: 3.5kΩ~6kΩ
6. Response Time (10%~90%): <1ms
7. Insulation resistor: 100MΩ, 100VDC
8. Overpressure: refer to Order Guide
9. Max. static pressure: 20MPa
10. Zero drift/static pressure: ≤0.5mV/MPa
Construction Specification
1. Diaphragm material: stainless steel 316L
2. Housing: stainless steel 316L
3. Pin: silicon rubber flexible wire
4. O-ring: Viton
5. Net weight: ~36g
Environment Condition
1. Position effect: deviate 90° from any orientation, zero change ≤0.2%FS
2. Shock: no change at 10gRMS,(20~2000)Hz
3. Impact: 100g, 11ms
4. Media compatibility: the gas, liquid which is compatible with stainless steel and Viton
Basic Condition
1. Media temperature: (25±1)ºC
2. Environment temperature: (25±1)ºC
3. Shock: 0.1g (1m/s/s) Max.
4. Humidity: (50%±10%)RH
5. Local air pressure: (86~106)kPa
5. Power supply: (1.5±0.0015)mADC
Basic Specification
| Specification* |
Min. |
Typ. |
Max. |
Units |
| Non-Linearity |
|
±0.15 |
±0.25 |
%FS,BFSL |
| Repeatability |
|
±0.05 |
±0.075 |
%FS |
| Hysteresis |
|
±0.05 |
±0.075 |
%FS |
| Zero output |
|
|
±3 |
mVDC |
| FS output |
60 |
|
|
mVDC |
| Zero thermal error |
|
±1.0 |
±1.2 |
%FS, @25ºC |
| Span thermal error |
|
±1.0 |
±1.2 |
%FS, @25ºC |
| Compensated temp. range |
0~50 |
ºC |
| Working temp. range |
-40~125 |
ºC |
| Storage temp. range |
-40~125 |
ºC |
| Long-term stability |
|
±0.3 |
±0.5 |
%FS/year |
| *testing at basic condition |
Outline Construction:
(Unit:mm)
Electric Connection:
Order Guide
| MDM290 |
Piezoresistive OEM Differential Pressure Sensor |
| |
|
Range code |
Pressure range |
Positive overpressure |
Negative overpressure |
| 0A |
0~35kPa |
70kPa |
35kPa |
| 02 |
0~70kPa |
150kPa |
70kPa |
| 03 |
0~100kPa |
200kPa |
100kPa |
| 07 |
0~200kPa |
400kPa |
200kPa |
| 08 |
0~350kPa |
700kPa |
350kPa |
| 09 |
0~700kPa |
1400kPa |
700kPa |
| 10 |
0~1MPa |
2.0MPa |
1.0MPa |
| 12 |
0~2MPa |
4.0MPa |
1.0MPa |
| 13 |
0~3.5MPa |
7.0MPa |
1.0MPa |
| |
|
Code |
Temperature compensation range |
| M |
Outer compensated resistor (providing resistor value) |
| |
|
Code |
Electric connection |
| 2 |
5-color 100mm silicon rubber flexible wires |
| |
|
| MDM290 12 M 2 the whole spec |
Order Note
1. Please notice that one side of the leading wire is High Pressure Side, the other is Low Pressure Side. Or identify High Pressure Side by mark "+", and identify Low Pressure Side by mark "-" carefully. During application, please pay attention that the pressure of high pressure side should be higher than that of low pressure side;
2. Please pay attention to protect the diaphragm, prevent it from damaging;
3. Please do not pull the 6 leading wires.
4. Temperature resistant range of standard Viton O-ring of sensor is -20ºC ~ 250ºC. When working temperature is lower than -20ºC, or sensor is applied in critical environment.
Certificates We Have
Company Overview
Products Family
Applications:
FAQ:
1. Q: Are you a manufacturer or trading company?
A: We are a 48-year professional manufacturer of Pressure/ Level/ Temperature/Flow transmitters with 4~20mA, Hart, Rs485 & Modbus protocols, pressure sensors with SDI, I2C, 4~20mA, 0.5~4.5V and etc, and wireless IOT measurement transmitters. We provide high-quality products with high competitive factory prices.
2. Q: What's your quality control system?
A: As an ISO9001:2008 certificated manufacturer, we have a strict quality control system, and each product is done with fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.
3. Q: Is there MOQ with your product?
A: We have no MOQ limits, 1pc for testing is acceptable.
4. Q: Do you provide customized products?
A: Yes, we can print your logo on our products; OEM, ODM & customization are welcomed.
5. Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.
6. Q: What is the lead time of your product?
A: We are a factory, our lead time is always within 10~15 working days for products without customization, but lead-time will vary based on different products. You can check detailed lead-time with our sales.
7. Q: What international certificates do you have for your products?
A: We have CE, RoHS, UL, ATEX as well as ship-use DNV, etc.
Audited Supplier 
){kind=link}
){kind=link}