| Customization: | Available |
|---|---|
| Type: | Radar |
| Structure Design: | Flange Type |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
LKZLD Digital Radar Material Level/Liquid Level Meter can accurately measure the polluting and corrosive media due to its special non-contact measurement characteristics. Its stable and accurate performance is also reflected in the complex measurement environment. The output 4mA ~ 20mA DC signal can provide remote control, using unique microwave technology and Echo-tech echo processing technology to adapt to various working conditions. The working mode of pulse can measure medium with small dielectric constant, and is safe to be used in various metal and non-metal containers, without harm to human body and the environment. It is widely used in reservoirs, dams, coal plants, power plants, petrochemicals, general industry and other occasions.
• Non-contact radar, no wear, no pollution
• Small antenna, easy to install
• Shorter wave length, better reflection on inclined solid surface
• Smaller measurement blind zone, and good for small tank measurement
• Small beam angle and concentrated ability, which enhances the echo ability and helps to avoid interference
• Negligible effect on corrosion and foam
• Negligible effect on atmospheric water vapor, temperature and pressure changes
• Severe dust environment will not affect electromagnetic wave working
• High signal-to-noise ratio, better performance can be obtained even in fluctuating conditions
• High frequency, best to measure solid and low dielectric constant medium
| Type | Low frequency radar | High frequency radar | Guided wave radar |
| Model | LKZLD-A | LKZLD-B | LKZLD-C |
| Measured media | solid, liquid | solid, liquid | solid, liquid |
| Measuring range | 0m ~ 35m | 0m ~ 70m | 0m ~ 35m |
| Process connection | flange, thread | flange, thread | flange, thread |
| Media temp. | -40ºC~ 250ºC | -40ºC~ 250ºC | -40ºC~ 250ºC |
| Process pressure | 0.1MPa ~ 4.0MPa | 0.1MPa ~ 4.0MPa | 0.1MPa ~ 4.0MPa |
| Output signal | 4mA ~ 20mA DC/HART (2-wire) | 4mA ~ 20mA DC/HART(2-wire) RS485/Modbus(4-wire) | 4mA ~ 20mA DC/HART (2-wire) |
){kind=link}