Microsensor Flowmeter Intelligent Water Treatment Water Drainage Customized Flow Measurement Flow Meter MFE600E
Introduction:
MFE600E Series Electromagnetic Flowmeter (hereinafter called Electromagnetic Flowmeter) is designed and manufactured with the most advanced domestic and abroad technology, featuring high accuracy, reliability, good stability and long service life.
We pay our attention to every detail in the process of the product structure design, material selection, manufacturing, assembly and factory testing etc. With a water tower up to 37m as pressure stabilizer for actual flow calibration, we have a professional production line for electromagnetic flowmeter, also we design and develop a series of software and hardware for electromagnetic flowmeter for mass production to ensure high quality in long term use. The product has backlight and wide temperature-ranged LCD display. With fully practical function, visual display, easy operation, it saves troubles for on-site installation operation and maintenance. MFE600E can be widely used in industrial fields such as petroleum, chemical, metallurgy, water supply and drainage, steel, coal, paper, food, textile, environmental protection and other municipal administration, water conservancy construction field etc.
Features:
- The measurement accuracy will not be influenced by the fluid density, viscosity, temperature, pressure and electrical conductivity changes;
- Open flow without moving parts in measuring pipe, no pressure loss;
- Integrated pressure,can measure flow and pressure at the same time;
- No mechanical inertia, with good sensitivity, it can measure the transient pulsating flux, and has good linearity;
- Only the lining and electrodes contact with the media, as long as the selection of electrode and lining materials is proper, they can be corrosion resistance and abrasive resistance, and are able to ensure long-term use;
- Multi-electrode structure ensures high accuracy. With the grounding electrode, it doesn't need grounding ring which saves the cost;
- When power off, EEPROM can protect parameter setting and cumulative values;
- The converter uses a low-power consumption single-chip for processing data which ensure the reliable performance, high accuracy, low power consumption and zero stability. Dot matrix LCD can display the integrated flux, transient flux, velocity, flow percentage and other parameters;
Specifications:
| Diameter |
Flange type: DN6~DN1600, >DN20 with built-in grounding electrode |
| Wafer type: DN25~DN200 |
| Threaded type: DN10~DN50 |
| Clamp type: DN15~DN150 |
| Explosion-proof |
Integrated: Explosion-proof (optional) Ex d ib mb IIC T4 Gb; Separated: non-flameproof |
| Pressure port |
ANSI 1/2 NPT, JIS G1/2, ISO M20 x1.5 |
| Measurement accuracy |
±0.2%(DN10~DN350); ±0.5%(DN6~DN1600) |
| Electrode type |
Standard fixed electrode, antifouling electrode |
| DN6~DN20: a pair of measuring electrodes, no grounding electrodes |
| DN25~DN500: a pair of measuring electrodes and a pair of grounding electrodes |
| >DN600: 2 pairs of measuring electrodes and a pair of grounding electrodes |
| Structure type |
Integrated type, separated type (cable length of separated type<100m) |
| Rated pressure |
GB: PN6, PN10, PN16, PN25, PN40, PN63, PN100 |
| ANSI: CLASS 150, CLASS 300, CLASS 600 |
| DIN: PN6, PN10, PN16, PN25, PN40, PN63, PN100 |
| JIS: 10K, 20K, 40K |
| Others: customizable |
| Electrode material |
316L, Ti, HB/HC, Ta, WC, Pt |
| Lining material |
Neoprene (CR), Natural Rubber (NR), Polyurethane Rubber (PU) |
| Polytetrafluoroethylene (PTFE), F46,PFA |
| Measured pipe |
Stainless steel 06Cr19Ni10(304),304 ASTM,SUS 304 |
| Flange/body flange |
Carbon steel (standard), stainless steel (optional) 06Cr19Ni10(304),304 ASTM,SUS 304 |
| Ground Ring Form |
No Ground ring DN20 and below,Grounding ring material same as measuring electrode |
| Converter housing |
Aluminum die-casting |
| Power supply |
100V AC~240V AC, 24V DC,12V DC |
| 3.6V Battery supply (RS485 output, without 4mA~20mA, wireless output, frequency/pulse output, and the frequency/pulse output is used only for calibration or calibration purposes.) |
| Output signal |
4mA~20mA DC (4mA to 0m3; 20mA to full scale) load resistance 0D~750D, active output |
| Hart, Frequency, pulse output (Passive, active output optional)Upper and lower limit alarm output |
| RS485 ( Modbus protocol), Hart and RS485/RS232 outputs cannot exist at the same time |
| Profibus-DP |
| 4G wireless transmission |
| Electrical connection |
ISO M20x1.5 |
| IP protection |
IP65; IP67; IP68 |
| Power consumption |
<5W |
| Environmental temp. |
-20°C ~60°C |
| Storage temp. |
-40°C ~60°C |
| Relative humidity |
5%~90% |
Certificates We Have
Company Overview
Products Family
Applications:
FAQ:
1. Q: Are you a manufacturer or trading company?
A: We are a professional manufacturer since 1971 on Pressure/ Level/ Temperature/ Flow transmitters with 4~20mA, Hart, Rs485 & Modbus protocols, pressure sensors with SDI, I2C, 4~20mA, 0.5~4.5V and etc, and wireless IOT measurement transmitters. We provide high-quality products with high competitive factory prices.
2. Q: What's your quality control system?
A: As an ISO9001:2008 certificated manufacturer, we have a strict quality control system, and each product is done with fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.
3. Q: Is there MOQ with your product?
A: MOQ is 5, 1pc for testing is acceptable.
4. Q: Do you provide customized products?
A: Yes, we can print your logo on our products; OEM, ODM & customization are welcomed.
5. Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.
6. Q: What is the lead time of your product?
A: We are a factory, our lead time is always within 10~15 working days for products without customization, but lead-time will vary based on different products. You can check detailed lead-time with our sales.
7. Q: What international certificates do you have for your products?
A: We have CE, RoHS, UL, ATEX as well as ship-use DNV, etc.
Audited Supplier 
){kind=link}